Butt Connector Quick Tip For Boat Wiring

June 21, 2018

If you own a boat, the odds are high that you’ve had to add, fix or replace some part of your boat wiring systems. If you have not, you’ve not owned your boat for very long.

But like any job, the proper tools and those little tips from experience make the job go so much easier.

Many times the wiring has to fit in a pipe or be pulled through an already wire-packed run. If this is the case, it helps to keep your butt connector splices as low profile as possible.

Heat resistant shrink butt terminal wire connectors

Boat Wiring Tips

Use quality heat shrink connectors with epoxy
use good crimpers and wire strippers made for the job
A heat gun is the tool for shrinking the tubing or connectors

Always use heat shrink butt connectors and if the situation allows, I like to have a piece of heat shrink tube that fits over the entire connection once the butt connectors have been shrunken. Don’t forget you have to put the heat shrink tubing down the wire first.

Heat Resistant Wire Connector

If you lay out your wires to be spliced and measure the connection so that the butt connectors are staggered in their placement so that they are not stacked up, they will be more streamlined once the splice is made.

Heat shrink solder sleeve wire splices

Crimp the butt connector with a quality crimping tool that is made for electrical connections. There is usually a notch for heat shrink that won’t puncture the coating. Make sure you squeeze hard to get a good connection and then pull on it within reason to make sure you got a good crimp.

20170525_073640-640x339

Here the connectors are staggered so that the final product is more streamlined than if they were connected in the same spot. This helped me feed the wire into the pipe on my poling platform.

früher

Kontaktiere uns

Author:

Ms. Joany Cao

Phone/WhatsApp:

+86 13580987327

beliebte Produkte

Aktuelles

Betriebsfluss von wassersicheren thermischen, schrumpfbaren Klemmenhülsen.

July 03, 2023

Frohe Weihnachten an alle meine Freunde

July 03, 2023

Branchen-Nachricheten

Feuerwehranwendung in der Industrie

July 03, 2023

Täsing und Funktion des geflochtenen Ärmels

July 03, 2023

Blog News

Pvc Heat Shrink Tube For Bend Protection

PVC Heat Shrinkable tube Use for Condensing Engine Bend protection

June 19, 2019

Heat-shrink tubing

June 05, 2019

You may also like

Related Categories

Mail an Lieferanten

Fach:

E-Mail-Adresse:

Nachrichten:

Your message must be betwwen 20-8000 characters

Kontaktiere uns

Author:

Ms. Joany Cao

Phone/WhatsApp:

+86 13580987327

beliebte Produkte

Aktuelles

Betriebsfluss von wassersicheren thermischen, schrumpfbaren Klemmenhülsen.

July 03, 2023

Frohe Weihnachten an alle meine Freunde

July 03, 2023

Branchen-Nachricheten

Feuerwehranwendung in der Industrie

July 03, 2023

Täsing und Funktion des geflochtenen Ärmels

July 03, 2023

Blog News

PVC Heat Shrinkable tube Use for Condensing Engine Bend protection

June 19, 2019

Heat-shrink tubing

June 05, 2019